3D filmBuilt, final render pending · 2026

Porsche night commercial

A 30-second night commercial: a Porsche 911 GT3 on a wet street lined with warm and cool light, cut across five cameras, graded and scored.

Signal 1:2

Project facts

Length
30 s, 720 frames at 24 fps
Frame
1920×1080, 2.39:1 letterbox
Cameras
5
Light pillars on the street
26
Sound
8 effects and a score
Audio cost
≈2,150 credits, about $0.39
Preview render on my laptop
97–240 s per frame at 33%
Full render on that laptop
about 2 months

My role

Direction, shot design, grade and sound. Scene built by directing Claude through the Blender MCP connector.

Built with

  • Blender 5.2
  • Cycles
  • Compositor node groups
  • Sketchfab and Poly Haven assets
  • ElevenLabs sound and music
  • SheepIt render farm

A 30-second car commercial at night. A Porsche 911 GT3 rolls out onto a rain-soaked street lined with alternating orange and cyan light pillars, filmed across five cameras and finished with a teal-orange grade, a 2.39:1 letterbox and a sound mix synced to the edit.

The idea

Night and rain do half the work in car films. Wet asphalt turns every light into a long reflection, and a dark frame lets the car’s paint carry the shot. So the whole scene is built around reflections: 26 light pillars alternate warm and cool down both sides of the road, and the road is a procedural wet-asphalt material that catches every one of them.

Getting the style right

  • Colour. Filmic AgX with high contrast, then a teal-orange grade in the compositor: cool shadows, warm highlights, and the orange body popping off the blue street.
  • Lens character. Glow on the highlights, anamorphic streaks through the passing lights, a vignette and film grain.
  • Frame. 2.39:1 letterbox, so it reads as cinema, not a render.
  • Weather. Rain particles in the air, a rain-and-city ambience bed under everything.

The edit and the sound

Five cameras cut on timeline markers. The wheels are driven by the distance the car travels, so they never slip, and the car follows a proper acceleration and braking arc. The score and eight sound effects were generated with ElevenLabs and placed on the timeline against the cuts. The timeline below is the actual structure of the music cue.

Getting good performance

This is where the project hit a wall. My laptop’s GPU, a Radeon R5 M330, cannot run Cycles, so everything renders on the CPU. Preview frames at a third of the resolution and 24 samples took between 97 and 240 seconds each. At full settings the 720 frames would have taken around two months.

So the fix was to stop rendering locally. I prepared a render-farm version of the file for SheepIt, the free community render farm: audio stripped, textures packed into the file, and output set to a PNG image sequence so a failed frame never ruins the rest. A second copy is set up for GPU rendering on a stronger PC. When the frames come back, they go onto the existing timeline with the sound that is already synced.

Assets and credits

The car is a free CC BY model from Sketchfab and the night lighting comes from a Poly Haven HDRI. Both get credited in the finished film. Total spend on outside services was the audio, roughly $0.39.

How it was made

I designed the shots, the grade and the sound, and checked every preview frame. The Blender scene itself was built by directing Claude through the Blender MCP connector, which runs Python inside a live Blender session. If you want a product film or a 3D spot made this way, get in touch.

Music cue structure over 30 secondsA drone and pads from 0 to 5 seconds, an arpeggiated bass from 5, full drums from 11 to 24, then a drop to a single sub hit for the last seconds. Headlights switch on at 1.9 seconds.0–5 s

Sub drone, cold pads

5–11 s

Arpeggiated bass enters

11–24 s

Drums, gated snare, distorted bass, rising leads

24–30 s

Drop to one sub hit, long reverb tail

0s5s10s15s20s25s30sHeadlights on, 1.9 s720 frames at 24 fps
Music structure of the cue. The rain bed runs under all of it, and engine, acceleration and pass-by effects sit on the shots they belong to.

Arrow keys to move, Enter to open, Esc to close.